From Eric

Contents 1 Galvo 1.1 Objectives 1.2 Schematics 1.3 Breadboard 1.4 PCB

Galvo

Objectives

See also my previous attempt using a handmade galvo (in french, sorry), and another one

Here are picture of the two setups:

There are also two short videos here and there .

Schematics

The schematics is basically the one proposed at [1].

Please note that the 5V used for the microcontroller / DACs is obtained from the 15V power supply. I am not sure that a genuine 7805 will appreciate the 10V shift... So I'll use some of the nice 3-pin step-down replacements such as:

Breadboard

PCB